LevelOne Default Password, Login & IP List

Info updated Aug. 15, 2018

The majority of LevelOne routers have a default username of admin, a default password of password, and the default IP address of 192.168.0.1.

These LevelOne credentials are needed when doing a login to the LevelOne router's web interface to change any settings.
Since some of the models don't follow the standards, you can see those in the table below.

Below the table are also instructions on what to do incase you forget your LevelOne router password, need to reset your LevelOne router to its factory default password, or the password reset doesn't work.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

LevelOne default Password List (Valid August 2018)

Model Default Username Default Password Default IP address
WAP-0003
WAP-0003 default factory settings
admin admin 192.168.1.1
WAP-0009
WAP-0009 default factory settings
admin 1234 192.168.2.1
WAP-6010
WAP-6010 default factory settings
admin admin 192.168.0.254
WBR-3406TX v2
WBR-3406TX v2 default factory settings
- admin 192.168.123.254
WBR-3406TX v4
WBR-3406TX v4 default factory settings
- admin 192.168.123.254
WBR-3408 v2
WBR-3408 v2 default factory settings
admin password 192.168.0.1
WBR-3600
WBR-3600 default factory settings
admin password 192.168.0.1
WBR-3800
WBR-3800 default factory settings
- password 192.168.0.1
WBR-6000 v1
WBR-6000 v1 default factory settings
admin password 192.168.0.1
WBR-6000 v2
WBR-6000 v2 default factory settings
admin password 192.168.0.1
WBR-6001
WBR-6001 default factory settings
- password 192.168.0.1
WBR-6002
WBR-6002 default factory settings
admin password 192.168.0.1
WBR-6003 v1
WBR-6003 v1 default factory settings
admin password 192.168.0.1
WBR-6003 v2
WBR-6003 v2 default factory settings
admin password 192.168.1.1
WBR-6005
WBR-6005 default factory settings
admin password 192.168.0.1
WBR-6010
WBR-6010 default factory settings
admin password 192.168.0.1
WBR-6011
WBR-6011 default factory settings
admin password 192.168.0.1
WBR-6020
WBR-6020 default factory settings
- password 192.168.0.1
WBR-6022
WBR-6022 default factory settings
admin password 192.168.0.1
WBR-6600
WBR-6600 default factory settings
admin password 192.168.0.1
WBR-6601
WBR-6601 default factory settings
admin password 192.168.0.1
WBR-6603
WBR-6603 default factory settings
- admin 192.168.1.1
WBR-6800
WBR-6800 default factory settings
- password 192.168.0.1
WBR-6802
WBR-6802 default factory settings
admin admin 192.168.1.1
WBR-6803
WBR-6803 default factory settings
- admin 192.168.123.254
WGR-6012
WGR-6012 default factory settings
admin admin 192.168.1.1
WGR-6013
WGR-6013 default factory settings
- admin 192.168.1.1


Instructions and common questions

Forgot your LevelOne router password?

Have you changed the username and/or password of your LevelOne router and forgotten what you changed it to?
Don't worry: all LevelOne routers come with a default factory set password that you can revert to by following the instructions below.

Reset LevelOne router to default password

If you decide to revert your LevelOne router to it's factory defaults, you should do the 30-30-30 reset as follows:

  1. When your LevelOne router is powered on, press and hold the reset button for 30 seconds.
  2. While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

Your LevelOne router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely admin/password).
If the factory reset didn't work, check out the LevelOne 30 30 30 factory reset guide .
Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).

I still can't access my LevelOne router with the default password

Make sure that you have followed the reset instructions correctly as the LevelOne routers should always rever to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.