WG103 print

Router info

OpenWrt supported: no
dd-wrt supported: no
WiFi: 54mbps (bg)
ETH-ports (LAN): 1
ETH-speed: 100mbps (10/100)
USB-ports: no

Hard reset instructions for Netgear WG103

With the reset button

  1. Have the router powered on (if just booted wait around one minute for it to load)
  2. With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
  3. When the power light starts to blink you can release the reset button and wait for the router to start up
  4. The power light will be solid (not blinking) once the router is started.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting

Default factory settings

Default Network name (SSID): NETGEAR_11g
Default Gateway IP: 192.168.0.229
Default admin username: admin
Default admin password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.229

User Manuals for WG103

Name Type Size Date
save Manual (click to download) pdf 2.82 MB Feb. 23, 2009
Cookies disclaimer

I agree Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our website without changing the browser settings you grant us permission to store that information on your device.