8014WG-TWC print

Router info

OpenWrt supported: no
dd-wrt supported: no
RAM: 32 MiB
Flash: n/a
WiFi: 54mbps (bg)
WAN-speed: N/A ()
ETH-ports (LAN): 4
ETH-speed: 100mbps (10/100)
USB-ports: 0
Other versions (newest first):
  • 8014WG (2008)
  • Hard reset instructions for SMC 8014WG-TWC

    With the reset button

    1. Have the router plugged in and turned on
    2. Press and hold the reset button with a sharp pen or paper clip for 15 seconds
    3. While still holding the reset button, unplug the power for 15 seconds
    4. After 15 seconds plug the router back in and still hold the reset button for another 10 seconds before releasing it.
    5. Wait for the router to boot up fully

    The 30-30-30 reset

    If the above instructions don't work you can always try the 30-30-30 reset as follows:
    1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
    2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
    3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
    This process usually works for resetting any router to it's factory setting.

    Default factory settings for SMC 8014WG-TWC

    Default Network name (SSID): TI,SMC8014WG-TWCXX
    Default Gateway IP:
    Default admin username: cusadmin
    Default admin password: password
    Default subnet mask:
    Default DNS server:

    User Manuals for 8014WG-TWC

    Name Type Size Date
    save User Manual (click to download) pdf 117.13 kB Dec. 11, 2008
    Cookies disclaimer

    I agree Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our website without changing the browser settings you grant us permission to store that information on your device.