Bluesocket BSAP-1930

The Adtran Bluesocket BSAP-1930 router has 300mbps WiFi, 2 N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
Login instructions


Bluesocket BSAP-1930 router specifications (specs)

System specs
CPU: 800 MHz
RAM: 256 MiB
Flash: 32 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: 2 x N/A ports
USB-ports: 0

Hard reset instructions for Adtran Bluesocket BSAP-1930

If your Bluesocket BSAP-1930 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Adtran Bluesocket BSAP-1930 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Adtran Bluesocket BSAP-1930

If you have performed a reset of your Bluesocket BSAP-1930 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.190.1 Adtran login instructions
Default username: adm1n Adtran router default password list
Default password: blue1socket 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.190.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the Bluesocket BSAP-1930

To login to the Bluesocket BSAP-1930 router and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://192.168.190.1
  3. You should be prompted with a login dialogue.
  4. Enter the username: adm1n and the password blue1socket
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Adtran credentials, as they can usually be shared across models/variants.




Report error on page
(If info is incorrect)