Adtran Default Usernames & Passwords
The default credentials needed to login to your Adtran router

Info updated Sept. 16, 2020

The majority of Adtran routers have a default username of adm1n, a default password of blue1socket, and the default IP address of 192.168.190.1.

These Adtran credentials are needed when doing a login to the Adtran router's web interface to change any settings.
Since some of the models don't follow the standards, you can see those in the table below.

Below the table are also instructions on what to do incase you forget your Adtran router password, need to reset your Adtran router to its factory default password, or the password reset doesn't work.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

Adtran default Password List (Valid September 2020)

Model Default Username Default Password Default IP address
1004W
1004W default factory settings
admin admin 192.168.1.1
Bluesocket (Adtran) BSAP-1925
Bluesocket (Adtran) BSAP-1925 default factory settings
adm1n blue1socket 192.168.190.1
Bluesocket BSAP-1800V2
Bluesocket BSAP-1800V2 default factory settings
adm1n blue1socket 192.168.190.1
Bluesocket BSAP-2030
Bluesocket BSAP-2030 default factory settings
adm1n blue1socket 192.168.190.1
Bluesocket BSAP-3040
Bluesocket BSAP-3040 default factory settings
adm1n blue1socket 192.168.190.1
NetVanta 150
NetVanta 150 default factory settings
admin password 10.10.10.1


Instructions and common questions

Forgot your Adtran router password?

Have you changed the username and/or password of your Adtran router and forgotten what you changed it to?
Don't worry: all Adtran routers come with a default factory set password that you can revert to by following the instructions below.

Reset Adtran router to default password

If you decide to revert your Adtran router to it's factory defaults, you should do the 30-30-30 reset as follows:

  1. When your Adtran router is powered on, press and hold the reset button for 30 seconds.
  2. While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

Your Adtran router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely adm1n/blue1socket).
If the factory reset didn't work, check out the Adtran 30 30 30 factory reset guide .


Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).

I still can't access my Adtran router with the default password

Make sure that you have followed the reset instructions correctly as the Adtran routers should always rever to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.