WPJ55
2.4GHz 3×3 Wireless Embedded Board with MiniPCI-e Slot

The Compex WPJ55 router has No WiFi, ETH-ports and 0 USB-ports.
It is also known as the Compex 2.4GHz 3×3 Wireless Embedded Board with MiniPCI-e Slot.

Quick links:
Default password/Login


WPJ55 router specifications (specs)

System specs
CPU: 700 MHz
RAM: n/a
Flash: n/a
Custom firmwares: OpenWrt
Connectivity
WiFi: No (None)
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: None
USB-ports: 0

Hard reset instructions for Compex WPJ55

If your WPJ55 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Compex WPJ55 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Compex WPJ55

If you have performed a reset of your WPJ55 device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



Report error on page
(If info is incorrect)