VG-8050
Wireless VoIP Gateway Router

The Comtrend VG-8050 router has 300mbps WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the Comtrend Wireless VoIP Gateway Router.

Quick links:
Default password/Login


VG-8050 router specifications (specs)

System specs
CPU: 400 MHz
RAM: 128 MiB
Flash: 128 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands: n/a
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0

Hard reset instructions for Comtrend VG-8050

If your VG-8050 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Comtrend VG-8050 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Comtrend VG-8050

If you have performed a reset of your VG-8050 device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): Comtrend_XYXYXYX
Default Gateway IP: 192.168.1.1 Comtrend login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



Report error on page
(If info is incorrect)