RE-7438UC

The Edimax RE-7438UC router has Gigabit WiFi, N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals

RE-7438UC router specifications (specs)

System specs
CPU: 1 GHz
RAM: 64 MiB
Flash: n/a
Custom firmwares: None

Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: None
ETH: None
USB-ports: 0

Hard reset instructions for Edimax RE-7438UC

If your RE-7438UC router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Edimax RE-7438UC in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Edimax RE-7438UC

If you have performed a reset of your RE-7438UC device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): repeater.setup
Default username: admin Edimax router default password list
Default password: 1234
Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.