GL-X750

The GL.iNet GL-X750 router has Gigabit WiFi, N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login


GL-X750 router specifications (specs)

System specs
CPU: 650 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: None
USB-ports: 0

GL.iNet GL-X750 review (quick overview)

Here is the quick comparison of how the GL.iNet GL-X750 compares to other routers on our site:

Average 39/100
Editor 82/100
WiFi 20/100
Hardware 17/100
Current price Find best price

For a full list of routers and how they compare to the GL-X750, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for GL.iNet GL-X750

If your GL-X750 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your GL.iNet GL-X750 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for GL.iNet GL-X750

If you have performed a reset of your GL-X750 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.8.1 GL.iNet login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.8.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



Report error on page
(If info is incorrect)