Reyee RG-EW3200GX PRO

The Ruijie Reyee RG-EW3200GX PRO router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.

The Reyee RG-EW3200GX PRO is featured in our
Best Mid- to high-end routers: buying guide

Quick links:
Default password/Login

Reyee RG-EW3200GX PRO router specifications (specs)

System specs
CPU: 1.35 GHz
RAM: 256 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac+ax)
WiFi bands: n/a
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0

Ruijie Reyee RG-EW3200GX review (quick overview)

Here is the quick comparison of how the Ruijie Reyee RG-EW3200GX compares to other routers on our site:

Average 72/100
Editor 84/100
WiFi 100/100
Hardware 33/100
Current price $134.38

For a full list of routers and how they compare to the Reyee RG-EW3200GX PRO, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Ruijie Reyee RG-EW3200GX PRO

If your Reyee RG-EW3200GX PRO router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Ruijie Reyee RG-EW3200GX PRO in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Ruijie Reyee RG-EW3200GX PRO

If you have performed a reset of your Reyee RG-EW3200GX PRO device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): Reyee_XYXYXYXX
Default Gateway IP: Ruijie login instructions
Default subnet mask:
Default DNS server:
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

Reyee RG-EW3200GX PRO Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Ruijie Reyee RG-EW3200GX PRO:

Ruijie stock firmware for the Reyee RG-EW3200GX PRO

Stock firmwares for the Reyee RG-EW3200GX PRO are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.

Report error on page
(If info is incorrect)