DWL-2000AP rev C1
High Speed 2.4GHz (802.11g) Wireless 108Mbps Access Point

The D-Link DWL-2000AP rev C1 router has 54mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the D-Link High Speed 2.4GHz (802.11g) Wireless 108Mbps Access Point.

Quick links:
Default password/Login
User Manuals

DWL-2000AP rev C1 router specifications (specs)

System specs
CPU: 180 MHz
RAM: 8 MiB
Flash: 1 MiB
Custom firmwares: None
WiFi: 54mbps (bg)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0

Hard reset instructions for D-Link DWL-2000AP rev C1

If your DWL-2000AP rev C1 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your D-Link DWL-2000AP rev C1 in the following way(s):

With the reset button

  1. Locate the reset button on the back off the router
  2. While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
  3. Hold the button pressed for 10 seconds, then release.
  4. The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
  5. You can now setup your router again through the user interface

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for D-Link DWL-2000AP rev C1

If you have performed a reset of your DWL-2000AP rev C1 device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask:

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

User Manuals for DWL-2000AP rev C1

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your DWL-2000AP rev C1.

Name Type Size Date
DoC (click to download) pdf 49.78 kB Oct. 19, 2003
Users Manual Part 1 (click to download) pdf 1.8 MB Oct. 19, 2003
Users Manual Part 2 Revised (click to download) pdf 2.53 MB Oct. 28, 2003

DWL-2000AP rev C1 Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the D-Link DWL-2000AP rev C1:

D-Link stock firmware for the DWL-2000AP rev C1

Stock firmwares for the DWL-2000AP rev C1 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.

Report error on page
(If info is incorrect)