Arlo Light (AL1101)

The Netgear Arlo Light (AL1101) router has 11mbps WiFi, N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals


Arlo Light (AL1101) router specifications (specs)

System specs
CPU: n/a
RAM: 0.078125 MiB
Flash: 0.25 MiB
Custom firmwares: None
Connectivity
WiFi: 11mbps (no Wi-Fi capability)
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: None
USB-ports: 0

Netgear Arlo Light review (quick overview)

Here is the quick comparison of how the Netgear Arlo Light compares to other routers on our site:

Average 29/100
Editor 86/100
WiFi 2/100
Hardware 1/100
Current price Find best price

For a full list of routers and how they compare to the Arlo Light (AL1101), check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Netgear Arlo Light (AL1101)

If your Arlo Light (AL1101) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Netgear Arlo Light (AL1101) in the following way(s):

With the reset button

  1. Have the router powered on (if just booted wait around one minute for it to load)
  2. With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
  3. When the power light starts to blink you can release the reset button and wait for the router to start up
  4. The power light will be solid (not blinking) once the router is started.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Netgear Arlo Light (AL1101)

If you have performed a reset of your Arlo Light (AL1101) device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

Similar routers



Report error on page
(If info is incorrect)