HE102
802.11a Wireless Access Point

The Netgear HE102 router has 11mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the Netgear 802.11a Wireless Access Point.

Quick links:
Default password/Login
Login instructions
User Manuals


HE102 router specifications (specs)

System specs
CPU: 266 MHz
RAM: 16 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 11mbps (a)
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0

Hard reset instructions for Netgear HE102

If your HE102 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Netgear HE102 in the following way(s):

With the reset button

  1. Have the router powered on (if just booted wait around one minute for it to load)
  2. With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
  3. When the power light starts to blink you can release the reset button and wait for the router to start up
  4. The power light will be solid (not blinking) once the router is started.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Netgear HE102

If you have performed a reset of your HE102 device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): Wireless
Default Gateway IP: 192.168.0.225 Netgear login instructions
Default username: admin Netgear router default password list
Default password: 1234 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.225
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the HE102

To login to the 802.11a Wireless Access Point and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://192.168.0.225
  3. You should be prompted with a login dialogue.
  4. Enter the username: admin and the password 1234
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Netgear credentials, as they can usually be shared across models/variants.


User Manuals for HE102

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your HE102.

Name Type Size Date
Manual (click to download) pdf 3.91 MB Nov. 20, 2001

HE102 Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear HE102:

Netgear stock firmware for the HE102

Stock firmwares for the HE102 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)