DOCSIS 3.0 Cable Modem
The Zoom 5341J (5341-00-00J) router has No WiFi, 1 N/A ETH-ports and 0 USB-ports.
It is also known as the Zoom DOCSIS 3.0 Cable Modem.
5341J (5341-00-00J) router specifications (specs)
RAM: 64 MiB
Flash: 4 MiB
Custom firmwares: None
WiFi: No ()
WiFi bands: n/a
WiFi throughput: n/a
ETH: 1 x N/A port
Zoom 5341J (5341-00-00J) review (quick overview)
Here is the quick comparison of how the Zoom 5341J (5341-00-00J) compares to other routers on our site:
For a full list of routers and how they compare to the 5341J (5341-00-00J), check the Router Buying Guide which will help you buy the most price-competitive router.
Hard reset instructions for Zoom 5341J (5341-00-00J)
If your 5341J (5341-00-00J) router is not working as it should, dropping connections or not
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Zoom 5341J (5341-00-00J) in the following way(s):
The 30-30-30 resetThere are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
If that doesn't work be sure to check out the
questions and answers
incase someone else has had similar problems resetting their router.
Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.
Default factory settings for Zoom 5341J (5341-00-00J)
If you have performed a reset of your 5341J (5341-00-00J) device or not changed the defaults, you should be able to access it with the following settings:
Default username: admin Zoom router default password list
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.100.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
How to login to the 5341J (5341-00-00J)
To login to the DOCSIS 3.0 Cable Modem and change the settings, you can follow these steps:
- Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
- Open your browser and visit http://192.168.100.1
- You should be prompted with a login dialogue.
Enter the username:
adminand the password
Note: If you have already changed the password use that instead.
- You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.
If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Zoom credentials, as they can usually be shared across models/variants.
5341J (5341-00-00J) Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Zoom 5341J (5341-00-00J):
Zoom stock firmware for the 5341J (5341-00-00J)
Stock firmwares for the 5341J (5341-00-00J) are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.
Report error on page
(If info is incorrect)